FibroSense

FibroSense

FIBROID SUPPORT TRAJECTORY

Complete a fingertip scan

Vitamin D, haemoglobin and iron/anaemia intelligence from one fingertip scan

Vitamin D—

Haemoglobin—

Iron / Anaemia—

Fibroid trajectory—

Miznee fibroid-support awareness

Vitamin D, haemoglobin, iron/anaemia and fibroid trajectory from one fingertip scan

Version 1.2.8

Signal capture

Not started

Press Start to begin measurement.

Fingertip pressure --%

Waiting for signal

Hold finger steady (5s)

Capturing signal (30 seconds per cycle)

Your FibroSense snapshot

Complete a fingertip scan

Results appear only after signal quality, fingertip placement and pressure checks pass.

Session readings: 0

About this scan

Age group Gender

Select age group and gender, then save the profile.

Optional Reference Values

Enter only reference values measured independently. Saved values are paired with the next completed three-cycle measurement session for comparison. Glucose retains its existing controlled calibration pathway. Independently measured haemoglobin, ferritin and 25(OH)D references also feed local FibroFT adaptive learning after the next completed three-cycle session; other references remain comparison-only.

Glucosemmol/L Haemoglobing/dL Heart ratebpm HRV RMSSDms Perfusion index% Hydration statusclassification Pulse-wave velocitym/s Vascular ageyears Total cholesterolmmol/L Ferritinµg/L Serum ironµmol/L 25(OH)D vitamin Dnmol/L Lactatemmol/L

No optional references saved.

Key fibroid-support signals

Focus

Estimated vitamin D—Synthetic-spectroscopy research estimate

Estimated haemoglobin—Awaiting scan

Iron / anaemia

Iron-deficiency risk—Haemoglobin-linked risk

Anaemia risk—Awareness estimate

Fibroid support trajectory—Longitudinal multi-signal support trajectory

No symptom diary is required. FibroSense automatically combines vitamin-D, haemoglobin, iron/anaemia and longitudinal scan patterns. This is support/awareness only and does not diagnose fibroids.

Core blood and circulation

Glucose level—Awaiting scan

Heart rate—beats per minute

Heart rhythm irregularity—Pulse regularity

Atrial fibrillation risk—Rhythm-screening estimate

Resting HRV—Beat-to-beat variation

Estimated hydration—Blood-volume pattern

Estimated peripheral circulation—Fingertip blood flow

Blood perfusion—Pulse-flow strength

Estimated pulse strength—Optical pulse amplitude

Vascular health

Estimated arterial stiffness—Pulse-wave estimate

Estimated vascular age—Pulse-wave estimate

Blood-vessel elasticity—Vessel-response estimate

Cardiometabolic risk—Combined glucose and vascular pattern

Autonomic metabolic stress—Glucose, pulse and HRV pattern

Estimated cholesterol risk—Risk classification only

Glucose patterns

Estimated average glucose—Uses saved readings

Glucose variability—Uses saved readings

Time in target range—Uses saved readings

Fasting glucose pattern—Fasting context

Post-meal response—After-meal context

Estimated HbA1c—Requires repeated readings

Hypoglycaemia risk—Low-glucose pattern

Hyperglycaemia risk—High-glucose pattern

Metabolic and nutrient-related risk

Prediabetes risk—Glucose-pattern classification

Diabetes risk—Glucose-pattern classification

Insulin-resistance risk—Metabolic-pattern classification

Metabolic-syndrome risk—Combined pattern

Lactate / recovery trend—Recovery-pattern estimate

Scan confidence: —

Scan confidence measures the technical reliability of this capture—not the probability that every health estimate is correct. It combines usable-frame coverage, passage of pulse/light/exposure gates, and PPG signal quality.

Advanced signal dashboard

Heart rate—Measured pulse frequency

Sample rate—Camera samples per second

Usable frames—Frames passing placement and signal checks

Gate completion—Pulse, light and exposure gates

PPG quality—Optical pulse quality component

Pulse periodicity—Repeatability of pulse cycles

Pulse-band energy—Energy inside the physiological pulse band

Fingertip pressure—Estimated contact pressure

Pressure stability—Consistency during capture

FingerLock—Fingertip identity/placement continuity

GeoLock—Fingertip-region stability

Red AC/DC—Red-channel pulsatile ratio

Green AC/DC—Green-channel pulsatile ratio

Red/green ratio—Cross-channel optical ratio

RGB oxygenation feature—Non-clinical internal optical feature; not SpO₂ or blood oxygen

Exposure state—Light level and clipping result

Calibration state—Factory/personal model context

Confidence breakdown: —

Women’s fibroid support

Vitamin D deficiency likelihood—Synthetic-spectroscopy research estimate

For personal awareness only. FibroSense estimates do not replace laboratory testing, ultrasound or clinical assessment.

Reference

If entered, it will be used to rapidly align your next readings. Leave blank if unavailable.

Saved readings

Recent measurements and downloadable exports appear here.

Recent measurements

Date	Time	Glucose

Trend (last 10)

Trend: all-time mean glucose

Awareness

No all-time mean data yet.

Awareness only. These all-time mean values are retained until Reset All Data and are never used to calculate glucose estimates.

Advanced

Controls

Creates a focused FibroSense PDF of vitamin D, haemoglobin, iron/anaemia and fibroid-support trajectory, with longitudinal vitamin-D context.

CSV export retains one row for each completed three-cycle session average on this device.

FibroFT Factory Training

Factory

Checking FibroFT factory model…

Advanced research provenance and local real-reference learning status only. Haemoglobin, ferritin and 25(OH)D learning uses independently entered real references. Serial fibroid imaging can calibrate the longitudinal support trajectory; size/count remain imaging/clinical labels and are not direct fingertip optical targets.

Accuracy & Calibration

Live

Current error: --

Current relative error: --

Live MARD: --

Live MER: --

N: 0

Factory baseline: checking server status…

Factory data: checking server status…

Calibration state: baseline -- | cal samples 0 | confidence --

Calculated only from accepted readings saved to Recent measurements with a matched reference and confidence passing threshold.

Torch compensation

Tries to reduce exposure to prevent clipping when using torch/flash. Disabled automatically where browser torch control is unavailable.

AutoStart

Off by default. When off, only the Start button begins a measurement.

Light level gating

Blocks measurements if light level is too far out of range.

Voice results

Speaks the latest measured result after each successful measurement.

Download readings

If disabled, readings still appear in Recent measurements but files are not downloaded.

Max stored measurements

Controls how many recent measurements FibroSense keeps for display and dataset export. Range: 10 to 500.

Max training rows

Controls how many GFT/calibration rows are retained for local model training. Range: 100 to 50,000.

Default camera

Choose the camera FibroSense should try first whenever the platform opens.

Choose your preferred export folder once on supported desktop browsers.

Exports an importable GoldFingerTip-compatible CSV using saved FibroSense readings with available PPG features.

Downloads the latest captured FingerLock fingertip print PNG from this device session.

Reference entry mode

User-side synthetic auto-reference training is disabled. Synthetic PPG/BGM factory training is controlled only from the FSENSE WordPress admin/server settings.

Clears saved history and adaptive learning data on this device. Server-side factory datasets are managed separately in FSENSE Admin.